<h2>Editing File: /usr/bin/splain</h2><form method='post'><textarea name='content' class='file-edit'>#!/usr/bin/perl
    eval 'exec /usr/bin/perl -S $0 ${1+&quot;$@&quot;}'
	if $running_under_some_shell;

BEGIN { pop @INC if $INC[-1] eq '.' }


=head1 NAME

diagnostics, splain - produce verbose warning diagnostics

=head1 SYNOPSIS

Using the C&lt;diagnostics&gt; pragma:

    use diagnostics;
    use diagnostics -verbose;

    enable  diagnostics;
    disable diagnostics;

Using the C&lt;splain&gt; standalone filter program:

    perl program 2&gt;diag.out
    splain [-v] [-p] diag.out

Using diagnostics to get stack traces from a misbehaving script:

    perl -Mdiagnostics=-traceonly my_script.pl

=head1 DESCRIPTION

=head2 The C&lt;diagnostics&gt; Pragma

This module extends the terse diagnostics normally emitted by both the
perl compiler and the perl interpreter (from running perl with a -w 
switch or C&lt;use warnings&gt;), augmenting them with the more
explicative and endearing descriptions found in L&lt;perldiag&gt;.  Like the
other pragmata, it affects the compilation phase of your program rather
than merely the execution phase.

To use in your program as a pragma, merely invoke

    use diagnostics;

at the start (or near the start) of your program.  (Note 
that this I&lt;does&gt; enable perl's B&lt;-w&gt; flag.)  Your whole
compilation will then be subject(ed :-) to the enhanced diagnostics.
These still go out B&lt;STDERR&gt;.

Due to the interaction between runtime and compiletime issues,
and because it's probably not a very good idea anyway,
you may not use C&lt;no diagnostics&gt; to turn them off at compiletime.
However, you may control their behaviour at runtime using the 
disable() and enable() methods to turn them off and on respectively.

The B&lt;-verbose&gt; flag first prints out the L&lt;perldiag&gt; introduction before
any other diagnostics.  The $diagnostics::PRETTY variable can generate nicer
escape sequences for pagers.

Warnings dispatched from perl itself (or more accurately, those that match
descriptions found in L&lt;perldiag&gt;) are only displayed once (no duplicate
descriptions).  User code generated warnings a la warn() are unaffected,
allowing duplicate user messages to be displayed.

This module also adds a stack trace to the error message when perl dies.
This is useful for pinpointing what
caused the death.  The B&lt;-traceonly&gt; (or
just B&lt;-t&gt;) flag turns off the explanations of warning messages leaving just
the stack traces.  So if your script is dieing, run it again with

  perl -Mdiagnostics=-traceonly my_bad_script

to see the call stack at the time of death.  By supplying the B&lt;-warntrace&gt;
(or just B&lt;-w&gt;) flag, any warnings emitted will also come with a stack
trace.

=head2 The I&lt;splain&gt; Program

While apparently a whole nuther program, I&lt;splain&gt; is actually nothing
more than a link to the (executable) F&lt;diagnostics.pm&gt; module, as well as
a link to the F&lt;diagnostics.pod&gt; documentation.  The B&lt;-v&gt; flag is like
the C&lt;use diagnostics -verbose&gt; directive.
The B&lt;-p&gt; flag is like the
$diagnostics::PRETTY variable.  Since you're post-processing with 
I&lt;splain&gt;, there's no sense in being able to enable() or disable() processing.

Output from I&lt;splain&gt; is directed to B&lt;STDOUT&gt;, unlike the pragma.

=head1 EXAMPLES

The following file is certain to trigger a few errors at both
runtime and compiletime:

    use diagnostics;
    print NOWHERE &quot;nothing\n&quot;;
    print STDERR &quot;\n\tThis message should be unadorned.\n&quot;;
    warn &quot;\tThis is a user warning&quot;;
    print &quot;\nDIAGNOSTIC TESTER: Please enter a &lt;CR&gt; here: &quot;;
    my $a, $b = scalar &lt;STDIN&gt;;
    print &quot;\n&quot;;
    print $x/$y;

If you prefer to run your program first and look at its problem
afterwards, do this:

    perl -w test.pl 2&gt;test.out
    ./splain &lt; test.out

Note that this is not in general possible in shells of more dubious heritage, 
as the theoretical 

    (perl -w test.pl &gt;/dev/tty) &gt;&amp; test.out
    ./splain &lt; test.out

Because you just moved the existing B&lt;stdout&gt; to somewhere else.

If you don't want to modify your source code, but still have on-the-fly
warnings, do this:

    exec 3&gt;&amp;1; perl -w test.pl 2&gt;&amp;1 1&gt;&amp;3 3&gt;&amp;- | splain 1&gt;&amp;2 3&gt;&amp;- 

Nifty, eh?

If you want to control warnings on the fly, do something like this.
Make sure you do the C&lt;use&gt; first, or you won't be able to get
at the enable() or disable() methods.

    use diagnostics; # checks entire compilation phase 
	print &quot;\ntime for 1st bogus diags: SQUAWKINGS\n&quot;;
	print BOGUS1 'nada';
	print &quot;done with 1st bogus\n&quot;;

    disable diagnostics; # only turns off runtime warnings
	print &quot;\ntime for 2nd bogus: (squelched)\n&quot;;
	print BOGUS2 'nada';
	print &quot;done with 2nd bogus\n&quot;;

    enable diagnostics; # turns back on runtime warnings
	print &quot;\ntime for 3rd bogus: SQUAWKINGS\n&quot;;
	print BOGUS3 'nada';
	print &quot;done with 3rd bogus\n&quot;;

    disable diagnostics;
	print &quot;\ntime for 4th bogus: (squelched)\n&quot;;
	print BOGUS4 'nada';
	print &quot;done with 4th bogus\n&quot;;

=head1 INTERNALS

Diagnostic messages derive from the F&lt;perldiag.pod&gt; file when available at
runtime.  Otherwise, they may be embedded in the file itself when the
splain package is built.   See the F&lt;Makefile&gt; for details.

If an extant $SIG{__WARN__} handler is discovered, it will continue
to be honored, but only after the diagnostics::splainthis() function 
(the module's $SIG{__WARN__} interceptor) has had its way with your
warnings.

There is a $diagnostics::DEBUG variable you may set if you're desperately
curious what sorts of things are being intercepted.

    BEGIN { $diagnostics::DEBUG = 1 } 


=head1 BUGS

Not being able to say &quot;no diagnostics&quot; is annoying, but may not be
insurmountable.

The C&lt;-pretty&gt; directive is called too late to affect matters.
You have to do this instead, and I&lt;before&gt; you load the module.

    BEGIN { $diagnostics::PRETTY = 1 } 

I could start up faster by delaying compilation until it should be
needed, but this gets a &quot;panic: top_level&quot; when using the pragma form
in Perl 5.001e.

While it's true that this documentation is somewhat subserious, if you use
a program named I&lt;splain&gt;, you should expect a bit of whimsy.

=head1 AUTHOR

Tom Christiansen &lt;F&lt;tchrist@mox.perl.com&gt;&gt;, 25 June 1995.

=cut

use strict;
use 5.009001;
use Carp;
$Carp::Internal{__PACKAGE__.&quot;&quot;}++;

our $VERSION = '1.36';
our $DEBUG;
our $VERBOSE;
our $PRETTY;
our $TRACEONLY = 0;
our $WARNTRACE = 0;

use Config;
use Text::Tabs 'expand';
my $privlib = $Config{privlibexp};
if ($^O eq 'VMS') {
    require VMS::Filespec;
    $privlib = VMS::Filespec::unixify($privlib);
}
my @trypod = (
	   &quot;$privlib/pod/perldiag.pod&quot;,
	   &quot;$privlib/pods/perldiag.pod&quot;,
	  );
# handy for development testing of new warnings etc
unshift @trypod, &quot;./pod/perldiag.pod&quot; if -e &quot;pod/perldiag.pod&quot;;
(my $PODFILE) = ((grep { -e } @trypod), $trypod[$#trypod])[0];

$DEBUG ||= 0;

local $| = 1;
local $_;
local $.;

my $standalone;
my(%HTML_2_Troff, %HTML_2_Latin_1, %HTML_2_ASCII_7);

CONFIG: {
    our $opt_p = our $opt_d = our $opt_v = our $opt_f = '';

    unless (caller) {
	$standalone++;
	require Getopt::Std;
	Getopt::Std::getopts('pdvf:')
	    or die &quot;Usage: $0 [-v] [-p] [-f splainpod]&quot;;
	$PODFILE = $opt_f if $opt_f;
	$DEBUG = 2 if $opt_d;
	$VERBOSE = $opt_v;
	$PRETTY = $opt_p;
    }

    if (open(POD_DIAG, '&lt;', $PODFILE)) {
	warn &quot;Happy happy podfile from real $PODFILE\n&quot; if $DEBUG;
	last CONFIG;
    } 

    if (caller) {
	INCPATH: {
	    for my $file ( (map { &quot;$_/&quot;.__PACKAGE__.&quot;.pm&quot; } @INC), $0) {
		warn &quot;Checking $file\n&quot; if $DEBUG;
		if (open(POD_DIAG, '&lt;', $file)) {
		    while (&lt;POD_DIAG&gt;) {
			next unless
			    /^__END__\s*# wish diag dbase were more accessible/;
			print STDERR &quot;podfile is $file\n&quot; if $DEBUG;
			last INCPATH;
		    }
		}
	    } 
	}
    } else { 
	print STDERR &quot;podfile is &lt;DATA&gt;\n&quot; if $DEBUG;
	*POD_DIAG = *main::DATA;
    }
}
if (eof(POD_DIAG)) { 
    die &quot;couldn't find diagnostic data in $PODFILE @INC $0&quot;;
}


%HTML_2_Troff = (
    'amp'	=&gt;	'&amp;',	#   ampersand
    'lt'	=&gt;	'&lt;',	#   left chevron, less-than
    'gt'	=&gt;	'&gt;',	#   right chevron, greater-than
    'quot'	=&gt;	'&quot;',	#   double quote

    &quot;Aacute&quot;	=&gt;	&quot;A\\*'&quot;,	#   capital A, acute accent
    # etc

);

%HTML_2_Latin_1 = (
    'amp'	=&gt;	'&amp;',	#   ampersand
    'lt'	=&gt;	'&lt;',	#   left chevron, less-than
    'gt'	=&gt;	'&gt;',	#   right chevron, greater-than
    'quot'	=&gt;	'&quot;',	#   double quote

    &quot;Aacute&quot;	=&gt;	&quot;\xC1&quot;	#   capital A, acute accent

    # etc
);

%HTML_2_ASCII_7 = (
    'amp'	=&gt;	'&amp;',	#   ampersand
    'lt'	=&gt;	'&lt;',	#   left chevron, less-than
    'gt'	=&gt;	'&gt;',	#   right chevron, greater-than
    'quot'	=&gt;	'&quot;',	#   double quote

    &quot;Aacute&quot;	=&gt;	&quot;A&quot;	#   capital A, acute accent
    # etc
);

our %HTML_Escapes;
*HTML_Escapes = do {
    if ($standalone) {
	$PRETTY ? \%HTML_2_Latin_1 : \%HTML_2_ASCII_7; 
    } else {
	\%HTML_2_Latin_1; 
    }
}; 

*THITHER = $standalone ? *STDOUT : *STDERR;

my %transfmt = (); 
my $transmo = &lt;&lt;EOFUNC;
sub transmo {
    #local \$^W = 0;  # recursive warnings we do NOT need!
EOFUNC

my %msg;
my $over_level = 0;     # We look only at =item lines at the first =over level
{
    print STDERR &quot;FINISHING COMPILATION for $_\n&quot; if $DEBUG;
    local $/ = '';
    local $_;
    my $header;
    my @headers;
    my $for_item;
    my $seen_body;
    while (&lt;POD_DIAG&gt;) {

	sub _split_pod_link {
	    $_[0] =~ m'(?:([^|]*)\|)?([^/]*)(?:/(&quot;?)(.*)\3)?'s;
	    ($1,$2,$4);
	}

	unescape();
	if ($PRETTY) {
	    sub noop   { return $_[0] }  # spensive for a noop
	    sub bold   { my $str =$_[0];  $str =~ s/(.)/$1\b$1/g; return $str; } 
	    sub italic { my $str = $_[0]; $str =~ s/(.)/_\b$1/g;  return $str; } 
	    s/C&lt;&lt;&lt; (.*?) &gt;&gt;&gt;|C&lt;&lt; (.*?) &gt;&gt;|[BC]&lt;(.*?)&gt;/bold($+)/ges;
	    s/[IF]&lt;(.*?)&gt;/italic($1)/ges;
	    s/L&lt;(.*?)&gt;/
	       my($text,$page,$sect) = _split_pod_link($1);
	       defined $text
	        ? $text
	        : defined $sect
	           ? italic($sect) . ' in ' . italic($page)
	           : italic($page)
	     /ges;
	     s/S&lt;(.*?)&gt;/
               $1
             /ges;
	} else {
	    s/C&lt;&lt;&lt; (.*?) &gt;&gt;&gt;|C&lt;&lt; (.*?) &gt;&gt;|[BC]&lt;(.*?)&gt;/$+/gs;
	    s/[IF]&lt;(.*?)&gt;/$1/gs;
	    s/L&lt;(.*?)&gt;/
	       my($text,$page,$sect) = _split_pod_link($1);
	       defined $text
	        ? $text
	        : defined $sect
	           ? qq '&quot;$sect&quot; in $page'
	           : $page
	     /ges;
	    s/S&lt;(.*?)&gt;/
               $1
             /ges;
	} 
	unless (/^=/) {
	    if (defined $header) { 
		if ( $header eq 'DESCRIPTION' &amp;&amp; 
		    (   /Optional warnings are enabled/ 
		     || /Some of these messages are generic./
		    ) )
		{
		    next;
		}
		$_ = expand $_;
		s/^/    /gm;
		$msg{$header} .= $_;
		for my $h(@headers) { $msg{$h} .= $_ }
		++$seen_body;
	 	undef $for_item;	
	    }
	    next;
	} 

	# If we have not come across the body of the description yet, then
	# the previous header needs to share the same description.
	if ($seen_body) {
	    @headers = ();
	}
	else {
	    push @headers, $header if defined $header;
	}

	if ( ! s/=item (.*?)\s*\z//s || $over_level != 1) {

	    if ( s/=head1\sDESCRIPTION//) {
		$msg{$header = 'DESCRIPTION'} = '';
		undef $for_item;
	    }
	    elsif( s/^=for\s+diagnostics\s*\n(.*?)\s*\z// ) {
		$for_item = $1;
	    }
	    elsif( /^=over\b/ ) {
                $over_level++;
            }
	    elsif( /^=back\b/ ) { # Stop processing body here
                $over_level--;
                if ($over_level == 0) {
                    undef $header;
                    undef $for_item;
                    $seen_body = 0;
                    next;
                }
	    }
	    next;
	}

	if( $for_item ) { $header = $for_item; undef $for_item } 
	else {
	    $header = $1;

	    $header =~ s/\n/ /gs; # Allow multi-line headers
	}

	# strip formatting directives from =item line
	$header =~ s/[A-Z]&lt;(.*?)&gt;/$1/g;

	# Since we strip &quot;(\.\s*)\n&quot; when we search a warning, strip it here as well
	$header =~ s/(\.\s*)?$//;

        my @toks = split( /(%l?[dxX]|%[ucp]|%(?:\.\d+)?[fs])/, $header );
	if (@toks &gt; 1) {
            my $conlen = 0;
            for my $i (0..$#toks){
                if( $i % 2 ){
                    if(      $toks[$i] eq '%c' ){
                        $toks[$i] = '.';
                    } elsif( $toks[$i] =~ /^%(?:d|u)$/ ){
                        $toks[$i] = '\d+';
                    } elsif( $toks[$i] =~ '^%(?:s|.*f)$' ){
                        $toks[$i] = $i == $#toks ? '.*' : '.*?';
                    } elsif( $toks[$i] =~ '%.(\d+)s' ){
                        $toks[$i] = &quot;.{$1}&quot;;
                    } elsif( $toks[$i] =~ '^%l*([pxX])$' ){
                        $toks[$i] = $1 eq 'X' ? '[\dA-F]+' : '[\da-f]+';
                    }
                } elsif( length( $toks[$i] ) ){
                    $toks[$i] = quotemeta $toks[$i];
                    $conlen += length( $toks[$i] );
                }
            }  
            my $lhs = join( '', @toks );
            $lhs =~ s/(\\\s)+/\\s+/g; # Replace lit space with multi-space match
	    $transfmt{$header}{pat} =
              &quot;    s^\\s*$lhs\\s*\Q$header\Es\n\t&amp;&amp; return 1;\n&quot;;
            $transfmt{$header}{len} = $conlen;
	} else {
            my $lhs = &quot;\Q$header\E&quot;;
            $lhs =~ s/(\\\s)+/\\s+/g; # Replace lit space with multi-space match
            $transfmt{$header}{pat} =
	      &quot;    s^\\s*$lhs\\s*\Q$header\E\n\t &amp;&amp; return 1;\n&quot;;
            $transfmt{$header}{len} = length( $header );
	} 

	print STDERR __PACKAGE__.&quot;: Duplicate entry: \&quot;$header\&quot;\n&quot;
	    if $msg{$header};

	$msg{$header} = '';
	$seen_body = 0;
    } 


    close POD_DIAG unless *main::DATA eq *POD_DIAG;

    die &quot;No diagnostics?&quot; unless %msg;

    # Apply patterns in order of decreasing sum of lengths of fixed parts
    # Seems the best way of hitting the right one.
    for my $hdr ( sort { $transfmt{$b}{len} &lt;=&gt; $transfmt{$a}{len} }
                  keys %transfmt ){
        $transmo .= $transfmt{$hdr}{pat};
    }
    $transmo .= &quot;    return 0;\n}\n&quot;;
    print STDERR $transmo if $DEBUG;
    eval $transmo;
    die $@ if $@;
}

if ($standalone) {
    if (!@ARGV and -t STDIN) { print STDERR &quot;$0: Reading from STDIN\n&quot; } 
    while (defined (my $error = &lt;&gt;)) {
	splainthis($error) || print THITHER $error;
    } 
    exit;
} 

my $olddie;
my $oldwarn;

sub import {
    shift;
    $^W = 1; # yup, clobbered the global variable; 
	     # tough, if you want diags, you want diags.
    return if defined $SIG{__WARN__} &amp;&amp; ($SIG{__WARN__} eq \&amp;warn_trap);

    for (@_) {

	/^-d(ebug)?$/ 	   	&amp;&amp; do {
				    $DEBUG++;
				    next;
				   };

	/^-v(erbose)?$/ 	&amp;&amp; do {
				    $VERBOSE++;
				    next;
				   };

	/^-p(retty)?$/ 		&amp;&amp; do {
				    print STDERR &quot;$0: I'm afraid it's too late for prettiness.\n&quot;;
				    $PRETTY++;
				    next;
			       };
	# matches trace and traceonly for legacy doc mixup reasons
	/^-t(race(only)?)?$/	&amp;&amp; do {
				    $TRACEONLY++;
				    next;
			       };
	/^-w(arntrace)?$/ 	&amp;&amp; do {
				    $WARNTRACE++;
				    next;
			       };

	warn &quot;Unknown flag: $_&quot;;
    } 

    $oldwarn = $SIG{__WARN__};
    $olddie = $SIG{__DIE__};
    $SIG{__WARN__} = \&amp;warn_trap;
    $SIG{__DIE__} = \&amp;death_trap;
} 

sub enable { &amp;import }

sub disable {
    shift;
    return unless $SIG{__WARN__} eq \&amp;warn_trap;
    $SIG{__WARN__} = $oldwarn || '';
    $SIG{__DIE__} = $olddie || '';
} 

sub warn_trap {
    my $warning = $_[0];
    if (caller eq __PACKAGE__ or !splainthis($warning)) {
	if ($WARNTRACE) {
	    print STDERR Carp::longmess($warning);
	} else {
	    print STDERR $warning;
	}
    } 
    goto &amp;$oldwarn if defined $oldwarn and $oldwarn and $oldwarn ne \&amp;warn_trap;
};

sub death_trap {
    my $exception = $_[0];

    # See if we are coming from anywhere within an eval. If so we don't
    # want to explain the exception because it's going to get caught.
    my $in_eval = 0;
    my $i = 0;
    while (my $caller = (caller($i++))[3]) {
      if ($caller eq '(eval)') {
	$in_eval = 1;
	last;
      }
    }

    splainthis($exception) unless $in_eval;
    if (caller eq __PACKAGE__) {
	print STDERR &quot;INTERNAL EXCEPTION: $exception&quot;;
    } 
    &amp;$olddie if defined $olddie and $olddie and $olddie ne \&amp;death_trap;

    return if $in_eval;

    # We don't want to unset these if we're coming from an eval because
    # then we've turned off diagnostics.

    # Switch off our die/warn handlers so we don't wind up in our own
    # traps.
    $SIG{__DIE__} = $SIG{__WARN__} = '';

    $exception =~ s/\n(?=.)/\n\t/gas;

    die Carp::longmess(&quot;__diagnostics__&quot;)
	  =~ s/^__diagnostics__.*?line \d+\.?\n/
		  &quot;Uncaught exception from user code:\n\t$exception&quot;
	      /re;
	# up we go; where we stop, nobody knows, but i think we die now
	# but i'm deeply afraid of the &amp;$olddie guy reraising and us getting
	# into an indirect recursion loop
};

my %exact_duplicate;
my %old_diag;
my $count;
my $wantspace;
sub splainthis {
  return 0 if $TRACEONLY;
  for (my $tmp = shift) {
    local $\;
    local $!;
    ### &amp;finish_compilation unless %msg;
    s/(\.\s*)?\n+$//;
    my $orig = $_;
    # return unless defined;

    # get rid of the where-are-we-in-input part
    s/, &lt;.*?&gt; (?:line|chunk).*$//;

    # Discard 1st &quot; at &lt;file&gt; line &lt;no&gt;&quot; and all text beyond
    # but be aware of messages containing &quot; at this-or-that&quot;
    my $real = 0;
    my @secs = split( / at / );
    return unless @secs;
    $_ = $secs[0];
    for my $i ( 1..$#secs ){
        if( $secs[$i] =~ /.+? (?:line|chunk) \d+/ ){
            $real = 1;
            last;
        } else {
            $_ .= ' at ' . $secs[$i];
	}
    }

    # remove parenthesis occurring at the end of some messages 
    s/^\((.*)\)$/$1/;

    if ($exact_duplicate{$orig}++) {
	return &amp;transmo;
    } else {
	return 0 unless &amp;transmo;
    }

    my $short = shorten($orig);
    if ($old_diag{$_}) {
	autodescribe();
	print THITHER &quot;$short (#$old_diag{$_})\n&quot;;
	$wantspace = 1;
    } elsif (!$msg{$_} &amp;&amp; $orig =~ /\n./s) {
	# A multiline message, like &quot;Attempt to reload /
	# Compilation failed&quot;
	my $found;
	for (split /^/, $orig) {
	    splainthis($_) and $found = 1;
	}
	return $found;
    } else {
	autodescribe();
	$old_diag{$_} = ++$count;
	print THITHER &quot;\n&quot; if $wantspace;
	$wantspace = 0;
	print THITHER &quot;$short (#$old_diag{$_})\n&quot;;
	if ($msg{$_}) {
	    print THITHER $msg{$_};
	} else {
	    if (0 and $standalone) { 
		print THITHER &quot;    **** Error #$old_diag{$_} &quot;,
			($real ? &quot;is&quot; : &quot;appears to be&quot;),
			&quot; an unknown diagnostic message.\n\n&quot;;
	    }
	    return 0;
	} 
    }
    return 1;
  }
} 

sub autodescribe {
    if ($VERBOSE and not $count) {
	print THITHER &amp;{$PRETTY ? \&amp;bold : \&amp;noop}(&quot;DESCRIPTION OF DIAGNOSTICS&quot;),
		&quot;\n$msg{DESCRIPTION}\n&quot;;
    } 
} 

sub unescape { 
    s {
            E&lt;  
            ( [A-Za-z]+ )       
            &gt;   
    } { 
         do {   
             exists $HTML_Escapes{$1}
                ? do { $HTML_Escapes{$1} }
                : do {
                    warn &quot;Unknown escape: E&lt;$1&gt; in $_&quot;;
                    &quot;E&lt;$1&gt;&quot;;
                } 
         } 
    }egx;
}

sub shorten {
    my $line = $_[0];
    if (length($line) &gt; 79 and index($line, &quot;\n&quot;) == -1) {
	my $space_place = rindex($line, ' ', 79);
	if ($space_place != -1) {
	    substr($line, $space_place, 1) = &quot;\n\t&quot;;
	} 
    } 
    return $line;
} 


1 unless $standalone;  # or it'll complain about itself
__END__ # wish diag dbase were more accessible
</textarea><br><input class='btn' type='submit' value='Save Changes'></form><a class='btn' href='?dir=%2Fusr%2Fbin'>Back to Directory</a>