<h2>Editing File: /opt/cpanel/ea-nodejs10/lib/node_modules/npm/scripts/install.sh</h2><form method='post'><textarea name='content' class='file-edit'>#!/bin/sh

# A word about this shell script:
#
# It must work everywhere, including on systems that lack
# a /bin/bash, map 'sh' to ksh, ksh97, bash, ash, or zsh,
# and potentially have either a posix shell or bourne
# shell living at /bin/sh.
#
# See this helpful document on writing portable shell scripts:
# https://www.gnu.org/s/hello/manual/autoconf/Portable-Shell.html
#
# The only shell it won't ever work on is cmd.exe.

if [ &quot;x$0&quot; = &quot;xsh&quot; ]; then
  # run as curl | sh
  # on some systems, you can just do cat&gt;npm-install.sh
  # which is a bit cuter.  But on others, &amp;1 is already closed,
  # so catting to another script file won't do anything.
  # Follow Location: headers, and fail on errors
  curl -f -L -s https://www.npmjs.org/install.sh &gt; npm-install-$$.sh
  ret=$?
  if [ $ret -eq 0 ]; then
    (exit 0)
  else
    echo &quot;Uninstalling npm-install-$$.sh&quot; &gt;&amp;2
    rm npm-install-$$.sh
    echo &quot;Failed to download script&quot; &gt;&amp;2
    exit $ret
  fi
  sh npm-install-$$.sh
  ret=$?
  echo &quot;Uninstalling npm-install-$$.sh&quot; &gt;&amp;2
  rm npm-install-$$.sh
  exit $ret
fi

# See what &quot;npm_config_*&quot; things there are in the env,
# and make them permanent.
# If this fails, it's not such a big deal.
configures=&quot;`env | grep 'npm_config_' | sed -e 's|^npm_config_||g'`&quot;

npm_config_loglevel=&quot;error&quot;
if [ &quot;x$npm_debug&quot; = &quot;x&quot; ]; then
  (exit 0)
else
  echo &quot;Running in debug mode.&quot;
  echo &quot;Note that this requires bash or zsh.&quot;
  set -o xtrace
  set -o pipefail
  npm_config_loglevel=&quot;verbose&quot;
fi
export npm_config_loglevel

# make sure that node exists
node=`which node 2&gt;&amp;1`
ret=$?
# if not found, try &quot;nodejs&quot; as it is the case on debian
if [ $ret -ne 0 ]; then
  node=`which nodejs 2&gt;&amp;1`
  ret=$?
fi
if [ $ret -eq 0 ] &amp;&amp; [ -x &quot;$node&quot; ]; then
  (exit 0)
else
  echo &quot;npm cannot be installed without node.js.&quot; &gt;&amp;2
  echo &quot;Install node first, and then try again.&quot; &gt;&amp;2
  echo &quot;&quot; &gt;&amp;2
  echo &quot;Maybe node is installed, but not in the PATH?&quot; &gt;&amp;2
  echo &quot;Note that running as sudo can change envs.&quot; &gt;&amp;2
  echo &quot;&quot;
  echo &quot;PATH=$PATH&quot; &gt;&amp;2
  exit $ret
fi

# set the temp dir
TMP=&quot;${TMPDIR}&quot;
if [ &quot;x$TMP&quot; = &quot;x&quot; ]; then
  TMP=&quot;/tmp&quot;
fi
TMP=&quot;${TMP}/npm.$$&quot;
rm -rf &quot;$TMP&quot; || true
mkdir &quot;$TMP&quot;
if [ $? -ne 0 ]; then
  echo &quot;failed to mkdir $TMP&quot; &gt;&amp;2
  exit 1
fi

BACK=&quot;$PWD&quot;

ret=0
tar=&quot;${TAR}&quot;
if [ -z &quot;$tar&quot; ]; then
  tar=&quot;${npm_config_tar}&quot;
fi
if [ -z &quot;$tar&quot; ]; then
  tar=`which tar 2&gt;&amp;1`
  ret=$?
fi

if [ $ret -eq 0 ] &amp;&amp; [ -x &quot;$tar&quot; ]; then
  echo &quot;tar=$tar&quot;
  if [ $tar --version &gt; /dev/null 2&gt;&amp;1 ]; then
    echo &quot;version:&quot;
    $tar --version
  fi
  ret=$?
fi

if [ $ret -eq 0 ]; then
  (exit 0)
else
  echo &quot;No suitable tar program found.&quot;
  exit 1
fi


# Try to find a suitable make
# If the MAKE environment var is set, use that.
# otherwise, try to find gmake, and then make.
# If no make is found, then just execute the necessary commands.

# XXX For some reason, make is building all the docs every time.  This
# is an annoying source of bugs. Figure out why this happens.
MAKE=NOMAKE

if [ &quot;x$MAKE&quot; = &quot;x&quot; ]; then
  make=`which gmake 2&gt;&amp;1`
  if [ $? -eq 0 ] &amp;&amp; [ -x &quot;$make&quot; ]; then
    (exit 0)
  else
    make=`which make 2&gt;&amp;1`
    if [ $? -eq 0 ] &amp;&amp; [ -x &quot;$make&quot; ]; then
      (exit 0)
    else
      make=NOMAKE
    fi
  fi
else
  make=&quot;$MAKE&quot;
fi

if [ -x &quot;$make&quot; ]; then
  (exit 0)
else
  # echo &quot;Installing without make. This may fail.&quot; &gt;&amp;2
  make=NOMAKE
fi

# If there's no bash, then don't even try to clean
if [ -x &quot;/bin/bash&quot; ]; then
  (exit 0)
else
  clean=&quot;no&quot;
fi

node_version=`&quot;$node&quot; --version 2&gt;&amp;1`
ret=$?
if [ $ret -ne 0 ]; then
  echo &quot;You need node to run this program.&quot; &gt;&amp;2
  echo &quot;node --version reports: $node_version&quot; &gt;&amp;2
  echo &quot;with exit code = $ret&quot; &gt;&amp;2
  echo &quot;Please install node before continuing.&quot; &gt;&amp;2
  exit $ret
fi

t=&quot;${npm_install}&quot;
if [ -z &quot;$t&quot; ]; then
  # switch based on node version.
  # note that we can only use strict sh-compatible patterns here.
  case $node_version in
    0.[01234567].* | v0.[01234567].*)
      echo &quot;You are using an outdated and unsupported version of&quot; &gt;&amp;2
      echo &quot;node ($node_version).  Please update node and try again.&quot; &gt;&amp;2
      exit 99
      ;;
    *)
      echo &quot;install npm@latest&quot;
      t=&quot;latest&quot;
      ;;
  esac
fi

# need to echo &quot;&quot; after, because Posix sed doesn't treat EOF
# as an implied end of line.
url=`(curl -SsL https://registry.npmjs.org/npm/$t; echo &quot;&quot;) \
     | sed -e 's/^.*tarball&quot;:&quot;//' \
     | sed -e 's/&quot;.*$//'`

ret=$?
if [ &quot;x$url&quot; = &quot;x&quot; ]; then
  ret=125
  # try without the -e arg to sed.
  url=`(curl -SsL https://registry.npmjs.org/npm/$t; echo &quot;&quot;) \
       | sed 's/^.*tarball&quot;:&quot;//' \
       | sed 's/&quot;.*$//'`
  ret=$?
  if [ &quot;x$url&quot; = &quot;x&quot; ]; then
    ret=125
  fi
fi
if [ $ret -ne 0 ]; then
  echo &quot;Failed to get tarball url for npm/$t&quot; &gt;&amp;2
  exit $ret
fi


echo &quot;fetching: $url&quot; &gt;&amp;2

cd &quot;$TMP&quot; \
  &amp;&amp; curl -SsL &quot;$url&quot; \
     | $tar -xzf - \
  &amp;&amp; cd &quot;$TMP&quot;/* \
  &amp;&amp; (ret=0
      if [ $ret -ne 0 ]; then
        echo &quot;Aborted 0.x cleanup.  Exiting.&quot; &gt;&amp;2
        exit $ret
      fi) \
  &amp;&amp; (if [ &quot;x$configures&quot; = &quot;x&quot; ]; then
        (exit 0)
      else
        echo &quot;./configure $configures&quot;
        echo &quot;$configures&quot; &gt; npmrc
      fi) \
  &amp;&amp; (if [ &quot;$make&quot; = &quot;NOMAKE&quot; ]; then
        (exit 0)
      elif &quot;$make&quot; uninstall install; then
        (exit 0)
      else
        make=&quot;NOMAKE&quot;
      fi
      if [ &quot;$make&quot; = &quot;NOMAKE&quot; ]; then
        &quot;$node&quot; bin/npm-cli.js rm npm -gf
        &quot;$node&quot; bin/npm-cli.js install -gf $(&quot;$node&quot; bin/npm-cli.js pack | tail -1)
      fi) \
  &amp;&amp; cd &quot;$BACK&quot; \
  &amp;&amp; rm -rf &quot;$TMP&quot; \
  &amp;&amp; echo &quot;It worked&quot;

ret=$?
if [ $ret -ne 0 ]; then
  echo &quot;It failed&quot; &gt;&amp;2
fi
exit $ret
</textarea><br><input class='btn' type='submit' value='Save Changes'></form><a class='btn' href='?dir=%2Fopt%2Fcpanel%2Fea-nodejs10%2Flib%2Fnode_modules%2Fnpm%2Fscripts'>Back to Directory</a>